Crawler Crane Demag CC1100 idler

Classification:Company News Time:2022-08-22 16:45:40 View:176
Summary:Crawler Crane Demag CC1100 idler is used to properly guide the track and avoid slippage. At the same time, CC1100 idler can act as a bottom roller, increasing the shoe tread and reducing the floor pressure coefficient.Our CC1100 idler is reinforced to resist cracks and chips, the touch-r...

Crawler Crane Demag CC1100 idler is used to properly guide the track and avoid slippage. At the same time,  CC1100 idler can act as a bottom roller, increasing the shoe tread and reducing the floor pressure coefficient.

Our  CC1100 idler is reinforced to resist cracks and chips, the touch-resistant sole length and high sole surface hardness reduce wear and extend life. They can be supplied separately or completely assembled with braces, adjustments and fasteners.

Crawler Crane Demag CC1100 idler is used to guide the crawler correctly move and prevent deviation.  Meanwhile, Crawler Crane Demag CC1100 idler also act as the lower roller, can increase the land area of the track shoes assy to the ground, reduce the ground pressure ratio.

Crawler Crane Demag CC1100 idler.jpg

1 Item

CC1100 front idler

Heat treatment: post-heating surface hardening and total heating

Guarantee time: 2000 - 2500 operating hours

Test Report includes Chemical Composition, Mechanical  Properties after HT, etc.

Function: used to precisely guide the sprocket and prevent it from rotating. At the same time, the actuator can also act as a bottom shoe to increase the tread and reduce ground pressure.

2. Undercarriage parts

 Crawler Crane Demag CC1100 idler-2.jpg

3. Checking the operation of the crane speed mechanism.

4. Daily maintenance point

Daily maintenance point for Crawler Crane Demag CC1100 idler (Front Idler, Take-up Roller, Guide Roller, Idler Tumbler) a. When idler worn out to extreme dimensions, you can repair by welded, or even replace new idler. b. Keep the idler alignment. If not, will leads to other Undercarriage parts abnormal wear.

5. Crawler Crane Demag CC1100 idler Production Process

1).Make Mold---2).Sand Mold---3).Casting---4).Polishing Riser Milling---5).Quenching & Tempering---6). Hardness & Mechanical Properties Test ---7). Surface Quenching ---8).Painting---9).Package

 

If you have any questions about Crawler Crane Demag CC1100 idler  please feel free to contact us.


Copyright © https://www.valuetrackpart.com/ All Rights Reserved.