- Tel: +86-535-6710636                  -  Fax: +86-535-6710836                  -  E-mail:       
- Address: No.1111, 2nd Building, No.177 Yingchun Road, Laishan District, Yaitai City, Shandong Provice, China


Copyright © Shandong Value Machinery Manufacture Co.,Ltd All Rights Reserved.鲁ICP备15018701号-1 


crawler crane Link belt LS138HII track shoe

2020/09/24 09:22
Page view

1. Product details of crawler crane Link belt LS138HII track shoe

Material: 35Mn2Si

Technology: casting

Heat treatment: full hardening and tempering, surface hardening.

Warranty: 2000-2500 working hours

Place of Origin: Shandong, China(Mainland)

Supply Ability: 5000 pcs/ Month

Warranty: 2000-2500 Working Hours

Min Order Quantity: 1 Piece

Package Detail: Export Standard Pallet/ Plywood Case

Port of Loading: Yantai, Qingdao, Shanghai

Trade Terms: EXW, FOB, CFR, CIF

2. Advantage --- Heat Treated

All casting should be Austenitized at 900°C for one Hr per every inch of casting thickness.

Then Quenched on water and Tempered for sufficient amount of temperature and time.

All heat treatment should be carried out after castings reach temperature lower than 200°C.

The general hardness after QT to be 230-320 BHN.

3. Package

4. Shipping documents

Link belt LS138HII track shoe have high bending strength and wear resistance.

Link belt LS138HII track pad 's pitch must be accurately adjusted to avoid pinching stones between two adjacent Link belt LS138HII track shoe.

Link belt LS138HII track plate must be installed in the same direction to form the belt of the head and tail.

In this way, the work uniformity is good, the wear of the Link belt LS138HII track shoe is low, and the running efficiency is high during work.

Shared By: