SHANDONG VALUE MACHINERY MANUFACTURE CO.,LTD

- Tel: +86-535-6710636                  -  Fax: +86-535-6710836                  -  E-mail: info@valuetrackpart.com                 -Website:www.valuetrackpart.com
- Address: No.1111, 2nd Building, No.177 Yingchun Road, Laishan District, Yaitai City, Shandong Provice, China
           

CONTACT  US

Copyright © Shandong Value Machinery Manufacture Co.,Ltd All Rights Reserved.鲁ICP备15018701号-1 

NEWS

Link-Belt crawler crane LS208H Track Shoe

Author:
Source:
2020/12/03 10:48
Page view

Link-Belt crawler crane LS208H Track Shoe should have high flexural strength and wear resistance. In order to avoid the high stress caused by sandwiching stones between the two adjacent Link-Belt crawler crane LS208H Track Shoe, the pitch of Link-Belt crawler crane LS208H Track Shoe should be adjusted accurately.

1. Product details of Link-Belt crawler crane LS208H Track Shoe

Material: 35Mn2Si

Technology: casting

Heat treatment: full hardening and tempering, surface hardening.

Warranty: 2000-2500 working hours

Link-Belt crawler crane LS208H Track Shoe have high bending strength and wear resistance.

Link-Belt crawler crane LS208H Track Shoe 's pitch must be accurately adjusted to avoid pinching stones between two adjacent track shoes.

Link-Belt crawler crane LS208H Track Shoe must be installed in the same direction to form the belt of the head and tail.

In this way, the work uniformity is good, the wear of the Link-Belt crawler crane LS208H Track Shoe is low, and the running efficiency is high during work.

2.Package

3. Advantage --- Heat Treated

A  All casting should be Austenitized at 900°C for one Hr per every inch of casting thickness.

B Then Quenched on water and Tempered for sufficient amount of temperature and time.

C All heat treatment should be carried out after castings reach temperature lower than 200°C. The general hardness after QT to be 230-320 BHN.

4.Shipping documents

Any inquiry pls send to info@valuetrackpart.com

Shared By: