KOBELCO P&H60P P&H70P P&H75P P&H85P Track Roller
1. Kobelco Track Roller Information
KOBELCO P&H60P P&H70P P&H75P P&H85P Track Roller can be supplied here! We produce them under the technical requirements of original parts. They will make you satisfied.
The following advantage for your reference:
a. Material: 100% new material for KOBELCO P&H60P P&H70P P&H75P P&H85P bottom roller is 40Mn2. Hard wearing, so that can extend the lower roller's service life.
b. Bushing: 100% fine cooper Bushing, instead of duplex metal (Iron and Cooper). The thickness of bushing is 6mm-10mm.
c. Floating seals: the size of Floating seals must 100% match the roller. If not, the oil will spill.
2. Production Process
The most important process is Hardening and Tempering. If the Kobelco track rollers are not under hardening and tempering, the Mechanical Properties, Yield Strength and Tensile Strength will not be good, the roller will be slip easily.
a. We have large warehouse which more than 3000m2. Most common parts have enough stock.
b. The nearest port is Qingdao. Just need 2.5 driving hours from the warehouse. That will help save much time for both of us
c. Professional engineer can help you find correct parts. You can supply correct crawler crane model, part number, 2D/3D drawing, etc.
d. We usually pack 18-24PCS KOBELCO P&H60P P&H70P P&H75P P&H85P track roller into one pallet.
4. Contact Information
If you are interested in Kobelco P&H60P P&H70P P&H75P P&H85P track roller, please feel free to contact us.