SHANDONG VALUE MACHINERY MANUFACTURE CO.,LTD

- Tel: +86-535-6710636                  -  Fax: +86-535-6710836                  -  E-mail: info@valuetrackpart.com                 -Website:www.valuetrackpart.com
- Address: No.1111, 2nd Building, No.177 Yingchun Road, Laishan District, Yaitai City, Shandong Provice, China
           

CONTACT  US

Copyright © Shandong Value Machinery Manufacture Co.,Ltd All Rights Reserved.鲁ICP备15018701号-1 

NEWS

Crawler crane Link belt LS138HII track roller

Author:
Source:
2020/06/11 08:16
Page view

Crawler crane Link belt LS138HII track roller transmits the weight of the crawler crane to the ground and rolls on the crawler. In order to prevent derailment, Crawler crane Link belt LS138HII track roller should also be able to prevent the track from moving sideways against it.

Crawler crane Link belt LS138HII track roller often works in muddy water, ash and sand, and bears the strong impact.And Crawler crane Link belt LS138HII track roller rim wear-resistant, reliable bearing seal, low rolling resistance

1. Detail:

Product Name: Crawler Crane Fushun QUY160C Track Roller / Bottom Roller /Lower Roller

Material: 40Mn2

Technique: Forging

Heat Treatment: Overall hardening and tempering, surface hardening

Warranty: 2000  working hours

Application For Track RollerFushun QUY160C is used to support the weight of the crane body and roll on the track shoes so that the machine travels along the tracks shoes. Fushun QUY160C is also used to hold track shoes so that it does not slip along the transverse direction and forces the track to slip on the floor when turning.

2. Production Process

3. Quality:

1). Roller Body: Material is 40Mn2 ---hard wearing,  so, that can extend the roller's service life.

2)Bushing: 100% fine cooper Bushing, instead of duplex metal(Iron and Cooper). The thickness of bushing is 6mm-10mm.

3Pin: The material is 42Cr

4Floating seals: the size of Floating seals must 100% match the roller. If not, the oil will spilling.

5The most important process is Hardening and Tempering if the rollers are not undereardening and tempering, the Mechanical  Properties, Yield Strength and Tensile Strength will not be good, the roller will be slip easily.

Shared By: