SHANDONG VALUE MACHINERY MANUFACTURE CO.,LTD

- Tel: +86-535-6710636                  -  Fax: +86-535-6710836                  -  E-mail: info@valuetrackpart.com                 -Website:www.valuetrackpart.com
- Address: No.1111, 2nd Building, No.177 Yingchun Road, Laishan District, Yaitai City, Shandong Provice, China
           

CONTACT  US

Copyright © Shandong Value Machinery Manufacture Co.,Ltd All Rights Reserved.鲁ICP备15018701号-1 

NEWS

American 7250 Track Shoe for 60Tons Crawler Crane

Author:
Source:
2020/07/02 17:23
Page view

American 7250 Track Shoe for 60Tons Crawler Crane

Detail Information for American 7250 Crawler Crane Track Shoe

Material

35SiMn, 35SiMnTi, 28CrMnMo, 28CrNiMnMo, 31Mn2SiMo

Technique

Casting

Heat Treatment

Whole quenching & tempering, then surface hardening

Warranty

2000 - 2500 working hours/ one year

Application

Track shoe is installed in the same direction to form the belt of the head and tail. In this way, the operation uniformity is good, the wear of track shoe is low, and the driving efficiency is high when walking.

 

Advantage for American 7250 Crawler Crane Track Shoe

1. Heat Treated

* All casting should be Austenitized at 900°C for one Hr per every inch of casting thickness. 

* Then Quenched on water and Tempered for sufficient amount of temperature and time. 

* All heat treatment should be carried out after castings reach temperature lower than 200°C. The general hardness after QT to be 230-320 BHN.

2. Inspection

* Chemical Composition

* Mechanical Properties after HT

* Metallography/Microstructure

* Dimensional Accuracy

* NDT Examination/LPI or MPI

* NDT Examination/UT

* Cutting / Sectioning

 3. Pin

The Pins are heat treated and fine machining, that can extend the service life.

 

Contact Information

If you are interested in American 7250 Crawler Crane Track Shoe, please feel free to contact us.

E-mail: Info@valuetrackpart.com

 

 

Shared By: