Crawler Crane Link Belt LS98 Track Shoe

Link Belt LS98 Track Shoe should have high flexural strength and wear resistance. In order to avoid the high stress caused by sandwiching stones between the two adjacent Link Belt LS98 Track Shoe, the pitch of Link Belt LS98 Track Shoe should be adjusted accurately.

Link Belt LS98 Track Shoe should be installed in the same direction to form the belt of the head and tail. In this way, the operation uniformity is good, the wear of track shoe is low, and the driving efficiency is high when walking.

Determining the crane position according to the actual situation of the hoisting site, if the ground is soft, smooth the track with the sleepers or steel plate. Obstacles within the effective radius and the effective height should be cleared to avoid collision.

1.Detail

2.Advantage：

Material: LINK BELT LS98 Track Shoe of our company is made of 31Mn2Si, while the Fushun first board is made of 35SiMn and even 35Mn. The content of MN in our board is much higher, and the mechanical performance of the board is higher.

We use high quality sand for casting, which can improve the quality of the board, you can see it clearly from the product appearance.

Our company according to the original factory plate technology requirements, the shaft hole coaxiality is high, this template in the work, by the distortion force is less, improve the service life of the plate. Our pin shaft is made of 40Cr material. After heat treatment, it is further processed, which can reduce the friction with the axle hole of LINK BELT LS98 Track Shoe.